Selected article for: "acetic acid and acquisition software"
Author: Gupta, D.K.; Verma, M.K.; Anand, R.; Khajuria, R.K.
Title: Development of a validated UPLC–qTOF-MS/MS method for determination of bioactive constituent from Glycyrrhiza glabra
  • Document date: 2013_1_11
    • ID: rw0qwdes_8
    Snippet: A UPLC-qTOF-MS system (Synapt, Waters, USA, equipped with MassLynx acquisition software, version 4.1) was used and experimental conditions were column, C18 (50 mm  2.1 mm); particle size, 1.7 mm (Acquity, BEH); flow rate, 200 mL/min; mobile phase, acetonitrile:2% acetic acid in water (75:25, v/v); injection volume, 1 mL. The analyte infusion experiments were performed using an in-built syringe pump. A UPLC-qTOF-MS with ESI interface was used fo.....
    Document: A UPLC-qTOF-MS system (Synapt, Waters, USA, equipped with MassLynx acquisition software, version 4.1) was used and experimental conditions were column, C18 (50 mm  2.1 mm); particle size, 1.7 mm (Acquity, BEH); flow rate, 200 mL/min; mobile phase, acetonitrile:2% acetic acid in water (75:25, v/v); injection volume, 1 mL. The analyte infusion experiments were performed using an in-built syringe pump. A UPLC-qTOF-MS with ESI interface was used for MS/MS analysis. ESI parameters were capillary voltage, 2.7 kV for positive mode; source temperature, 100 1C; desolvation temperature, 200 1C; cone gas flow, 50 L/h and desolvation gas flow, 550 L/h. The multiple reaction monitoring (MRM) mode was used to monitor the transitions

    Search related documents:
    Co phrase search for related documents
    • acetic acid and flow rate: 1, 2, 3, 4, 5, 6, 7, 8, 9
    • acetic acid and gas flow: 1
    • acetic acid and injection volume: 1
    • acetic acid and mobile phase: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
    • acetic acid and monitoring MRM mode: 1
    • acquisition software and mm particle size: 1
    • capillary voltage and cone gas flow: 1
    • capillary voltage and desolvation temperature: 1
    • capillary voltage and flow rate: 1, 2
    • capillary voltage and gas flow: 1, 2
    • capillary voltage and mobile phase: 1, 2
    • cone gas flow and desolvation temperature: 1, 2
    • cone gas flow and flow rate: 1, 2
    • cone gas flow and gas flow: 1, 2
    • cone gas flow and mobile phase: 1
    • cone gas flow and monitoring MRM mode: 1
    • desolvation temperature and flow rate: 1, 2
    • desolvation temperature and gas flow: 1, 2
    • desolvation temperature and mobile phase: 1